The Ultimate Guide to Selecting the Right Simulator for Your Business
You've decided to purchase a flight simulator. This is a big decision and we're here to help make the buying process easier with information on what to look for, questions to ask and more.
There are multiple vendors offering flight simulators for sale in today’s market. You now have the daunting task of deciding which one to purchase. The purpose of this blog is to provide you with thoughts, knowledge and insight to help you select the best flight simulator for your business. Aviation regulators have many designations for various levels of Flight Simulation Training Devices, such as BATD, AATD, FTD, FNPT, MCC, FFS, etc. A Frasca representative can help you determine the specific level that best meets your requirements. For the purpose of this blog, we will use the general term, “flight simulator”.
A Bit of History
Flight simulators are widely used by flight training organizations worldwide, however this was not always the case. The first mass produced simulator was built in 1929 by Link and didn’t get much use until the Air Force started using them for pilot training in WWII. Over the decades, flight schools, airlines and other organizations began implementing them into their training programs for a variety of reasons, most notably for safety as well as cost effectiveness, mission training, recurrency training and more.
Over time, and as simulators became more realistic, they were more widely used. Today, virtually all collegiate training programs use flight simulators (often AATDs and FTDs) for pilot training, while airlines rely on Full Flight Simulators (FFSs). Military organizations, helicopter operators (med-evac, law enforcement, tourism, etc.) and other businesses involved with pilot training typically use some level of flight simulation device as well.
Buying a Simulator is an Important Decision That Deserves Research
Training Value – A simulator’s training value is directly related to it’s fidelity or realism. It’s extremely important to learn to ‘fly right’ from the start.
In times of stress, such as emergency situations, pilots will revert to the way they first learned a task. If the flight simulator used in their initial training was not accurate to the aircraft, negative training may lead to errors in their decision-making process and final actions, creating a safety hazard. If a student pilot is initially taught something incorrectly, they will have a difficult time correcting bad habits. Conversely, pilots who experienced training in a realistic flight simulator are more likely to perform the correct actions leading to a successful and safe outcome.
Financial – It is important to consider both acquisition (up-front) costs in the short-term and total ownership (life-cycle) costs in the long-term. While it may seem logical to purchase the least expensive flight simulator, overlooking additional operational costs will negate any original savings.
These additional long-term costs can include higher downtime as a result of breakage, decreased revenue due to unscheduled maintenance time, increased labor costs for repairs, decreased useful life if the vendor goes out of business, and lower employee and customer morale due to utilizing an inferior and ineffective simulator.
It’s important to evaluate a flight simulator based on overall value, quality and long-term cost, not simply on the upfront price.
Image / Reputation – While at first glance the equipment you purchase may seem inconsequential in how you define your own program, it’s important to realize that most prospective students will view the equipment you purchase as an indication of the quality of your entire program. Try looking at your purchase from a different perspective and ask yourself these important questions:
How would you like your program to be perceived by your potential students and customers?
If you were a student, how would you feel about your program offering and equipment? Is it worth the investment being asked? Could you potentially even increase your course offering cost if you had higher quality equipment?
For most people, purchasing a flight simulator is an experience that only happens once in their career. Therefore, you may be learning how to do this at the same time you are actually doing it. For others, especially those operating larger flight school operations, you may need to purchase multiple simulators and are making complicated decisions that affect the growth of your institution.
Being human, it is expected that we will all make mistakes. As pilots, we read accident reports to increase our knowledge and decrease the potential to make those same mistakes. Regarding simulator purchases, there are several well-documented situations where schools purchased flight simulators from small start-up companies who went bankrupt shortly after delivering the simulators, thereby leaving the school with no service and support. There are also several well-documented situations where schools purchased flight simulators from large well-established companies who shortly thereafter, through a corporate decision, decided to no longer support that business segment and left the schools with limited service and support on their equipment.
While we are not suggesting that any particular company will go bankrupt or close down their flight simulator division, we are suggesting that you seriously consider these situations and perform appropriate research yourself to judge the long-term viability of the different companies.
Because of the long-lasting effects this decision may have in multiple areas of your flight program and your personal career, this decision warrants a significant amount of due diligence with a formal decision making process.
Look Beneath the Hood – Not All Simulators are Created Equal
It may seem logical to assume that since different company’s flight simulators received approval by the authorities for equal training credits, then the simulators themselves are equal. This section will provide you with guidance on how to look deeper at the flight simulators so you can make an educated decision about which one will be better for your program.
Software Matters
As you may know, most of the training aircraft being built today include new generation avionics suites such as Garmin G1000, Avidyne Entegra, Avidyne R9, Aspen Evolution, and Rockwell Collins ProLine 21. These avionics suites are very complex and integrate with many systems within the aircraft. When designing a flight simulator for those aircraft, the simulator company must decide whether to use the actual equipment and software from the avionics manufacturers or something else.
As the “Law of Primacy” states, the way we learn things initially creates strong impressions in the mind which are difficult to erase. This is the way our brain processes information and effectively stores it in our long-term memory. This is extremely important when using flight simulators as a training replacement of the actual aircraft. When buying your simulator, especially when training on today’s glass cockpit systems, you will want actual OEM components/software from the avionics manufacturers. This provides the most accurate simulation because the avionics suites operate and function in the flight simulator exactly like they do in the actual aircraft.
Other companies incorporate a variety of third party software into their flight simulators in an attempt to “reverse engineer” glass cockpit systems. This software is oftentimes available to the amateur market in the form of add-ons for hobbyist PC-simulators and is substantially less realistic than the actual system in the aircraft. Because of this, many tasks cannot be accurately simulated. As discussed in the previous section, this violates the Law of Primacy which introduces negative training and impacts safety.
Read more on “The Law of Primacy”
This is also clearly evident as the author of the book titled ‘Microsoft Flight Simulator X for Pilots’ stated, “Some of the buttonology details, though, are different enough on the real G1000 vs. the FSX version that the training utility is limited, or perhaps even what we call negative transfer. That is, it’s done differently enough in the real world that you’re better just learning the real G1000.”
Companies that provide add-on software for flight simulators clearly admit their software is not realistic by attempting to distance themselves from liability within their disclaimer. These types of statements are warning signs of the potential impact of unrealistic simulation on your training programs and ultimately, the safety of your students.
Another software issue to consider is whether the simulator company has the ability to repair, modify and enhance the software incorporated into their flight simulator. For companies that use 3rd-party simulation software, this is nearly impossible. When error messages occur or PC’s consistently reboot due to software issues, these integrator companies have limited control over the supplier’s software and may try to shift the blame to that to the software provider ultimately leaving you stranded with no solution or recourse. This is why it’s critical to find a flight simulator provider that writes their own simulation software in-house. This allows complete control of the simulator’s software and for the provider to be responsive to any future issues.
Accurate Simulation: Looking at Failures and Faults
Accurate Simulation: Looking at Failures and Faults
In flight and during training, the eyes provide approximately 70% of motion cues and many studies had the motion system turned off while the pilot thought they were moving simply based on the visual cues. The problem comes in if the motion cue is incorrect or not synced properly then the pilot experiences vertigo due to the disconnect between visual and sensory cues. It becomes distracting and learning is inhibited.
With respect to motion systems that do not accurately replicate motion cues, one study concluded that they “can interfere with performance in a transfer condition, because the learner has become reliant on the supplementary information.” This is another way of saying that bad motion causes pilots to rely on inaccurate cues, which leads to a negative transfer of training. When considering purchasing a flight simulator with motion, it is critical to determine whether the motion system is accurate and realistic, otherwise, you could be introducing negative transfer of training and resulting safety issues.
While most regulatory authorities do not require motion systems for general aviation training, many manufacturers include motion systems on their devices. It is important to note that few of those motion systems have been validated or tested for accuracy. When the FAA evaluates motion-equipped flight simulators, they require specific tests to measure the relative responses of the motion system, visual system, and flight deck instruments as well as transport delay times. These objective tests validate the accuracy of the motion system.
When customers request a motion-equipped flight simulator from Frasca, they get a high-fidelity system synchronized at significantly better transport delay times than those required by the authorities. The result minimizes negative transfer of training.
Frasca believes it is better to have no motion than a low-quality motion system that produces inaccurate and unrealistic motion cues to the pilot.
Experience with Qualification at Various Levels
Pro Tip: To check this quickly, you can ask a manufacturer for their list of qualified devices.
This chart shows the number of Frasca devices qualified over the years.
Physical Evaluation Versus Virtual
While you are going through a demonstration of a flight simulator, keep in mind that a company’s sales representative has been trained to demonstrate only the strengths and avoid the weaknesses of their own flight simulator. It would behoove you to take an active role in the demonstration and interject specific tasks from your training program to observe how their flight simulator responds. Oftentimes, deficiencies in the flight simulator’s software are not obvious when observed from within a scripted demonstration flight, but these deficiencies become excruciatingly obvious when routes are changed in-flight as so often happens in the real world and thus within your training programs. You will probably notice the sales professional becoming uncomfortable and possibly defensive as you point out deficiencies within their flight simulator.
Another justification to put forth the effort of a physical evaluation is because that is the only way for you to personally assess the quality of the flight simulator itself. This is especially important as you determine how the flight simulator will withstand the rigor of constant usage by students who are notoriously tough on equipment.
Service & Support Matter
7 things to ask your flight simulator manufacturer about their service program:
1. How many Field Service Technicians are available for installations and maintenance visits?
2. What’s the level of spare parts inventory available at the manufacturer’s site. Most flight simulator manufacturers have only been in business for less than a decade and may not realize what is required to maintain their simulators for the long-term.
3. If an issue arises, how does the flight simulator manufacturer respond? What is their course of action for remedy?
4. What does the warranty agreement include?
5. Does the flight simulation manufacturer maintain an electronic documentation database to help your team in case of any troubleshooting issues that can be quickly handled?
6. What about remote access to the flight simulator for more complication issues?
7. Can I talk to some of your current customers about their experience?
Thoroughly Investigate the Companies
Some quick ways to start your investigation:
- Learn more out about the company’s workforce as that will give you insight into their longevity. Do they hire full-time employees within their engineering staff or do they simply hire contract engineers? An established employee base indicates more of a long-term approach as compared to the short-term nature of contract employees.
- Research the company’s facilities as that is indicative of the company’s long-term investment in this industry.
- Obtain a Dun & Bradstreet Business Information Report that contains key scores and easy-to-read risk indicators. (Frasca’s D&B number is 059947903 – feel free to check us out!)
- Ascertain whether the company has undertaken efforts to obtain any type of industry certification.
- Review the company’s history and determine whether the company has a proven track record and definable goals that indicate their intent to continue within the industry for the long-term.
Frasca International designs and manufactures simulation technology and components that increase pilot safety. Having delivered over 3000 devices worldwide, we are proud to serve a wide range of flight training customers.Frasca International designs and manufactures simulation technology and components that increase pilot safety. Having delivered over 3000 devices worldwide, we are proud to serve a wide range of flight training customers. .. The Frasca team is happy to help answer any questions you may have as you decide on the right simulator for your business. Reach out to us anytime.
STAY CONNECTED
Stay up to date with all things FRASCA. Sign up for our Quarterly eSimuLetter.